- Call us: +44 203 397 0096
(Click on stars to leave a review)
Our descaler removes scale and water marks to leave surfaces clean.
Machine descaling: Fill dishwasher with fresh water. Add sufficient Descaler to the water to produce a 10-20% solution (100-200ml per ltr) depending on degree of scaling. Turn machine on for 10-15 minutes then drain and inspect. Repeat process if required. Drain and rinse thoroughly. Leave door open and allow to dry. Routine maintenance: Pour 100ml of descaler into the machine and run on a normal cycle 5-6 times before draining. Repeat on a monthly basis or more regularly if necessary.
Kettles: Dilute at 1:5 parts water and cover element in solution. Turn kettle on and heat solution. DO NOT allow kettle to boil. Repeat process until scale has dissolved.
Irons: Dilute at 1:5 parts cold water and fill water tank. Heat iron to medium-high temperature and allow it to steam until all the solution has evaporated out of the iron. Refill the water tank with cold water and repeat process to remove any chemical residues. Descale irons once every two weeks.
Boilers, drink machines, water heaters, bain maries, water coolers, etc: Dilute at 1:5 - 1:20 parts warm water dependent on the degree of scale. Fill the item or soak in solution until the scale dissolves. Scrub if required to remove heavy deposits. Rinse thoroughly and allow to dry.
Hard surfaces: Floors, walls, tiles, etc: Dilute at 1:5 - 1:20 parts warm water dependent on the degree of scale. Soak in solution and scrub if required to remove heavy deposits. Rinse thoroughly and allow to dry.
Cement and concrete: Apply neat and soak for up to 1 hour. Scrub if required to remove heavy deposits. Rinse thoroughly and allow to dry.
CIP, pipework and radiators: Dilute at 1:5 parts cold water and re-circulate in pipework. Re-circulate CIP cleaners with cold water only to remove any chemical residues.